Jump to content
Ad: Genuine BMW parts & accessories from the BMW official store on eBay ×

Boot Opening

maverp1

By maverp1,
in BMW 7 Series Forum

 Share

Recommended Posts

maverp1 Explorer

maverp1

Posted
Posted

Hi all next job on the list should my boot open fully on its own when I press the fob button or the boot release button in the car the boot unlocks and raises slightly but does not open fully if so what direction should I go to repair this

Cheers Paul

V8manual Apprentice

V8manual

Posted
Posted

Highly unlikely as the powered boot was a rare option in the UK. Best way to check is to look for a hydraulic cylinder with pipes on the left-hand hinge in place of the standard gas strut or find the pump which is located above the battery.

All cars had the standard soft close which is what you are describing.

Latest Deals

BMW Official Store for genuine BMW parts & accessories

Disclaimer: As the club is an eBay Partner, The club may be compensated if you make a purchase via eBay links

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing




  • Latest Topics

    1. 0

      genuine bmw 840ci sport 17 stagged bbs alloy wheels

      For sale BMW 840ci sport wheels BBs new centres 17 stagged 9 rear 8 front New michelin tyres 255/40/17 pilot sport 4 front . New 275/40/17 michelin vintage range pilot sport 2 rear (covered no more than 200 miles £1200 worth of tyres) Straight wheels no welds For sale as I have upgraded wheels £2750 or best offer
      Rich1966 in Buy & Sell Parts & Accessories
    2. 1

      Power steering issue

      Morning Charlie Welcome to the Forum I would guess either you have trapped the wiring or pulled a plug to the power steering somewhere. The only way is to back track all your work and check. Assuming that you have checked fuses and the power steering motor ? Good Luck Dave
      Greydog in BMW 1 Series Forum
    3. 1

      Power steering issue

      I have recently replaced my wastegate on my car and now I have lost my power steering cannot control the car at all. Any ideas why this has happened
      Charlie2003betts in BMW 1 Series Forum
    4. 8

      Instrument cluster suddenly died

      Hi Christopher I have never used a Haynes Manual so can't comment on it's information. I work from BMW ISTA/INPA with it's WIS and TIS plus a few other sources (An old neighbour is senior management level in BMW) My Diagnostic Program using your Vin tells me your car is a BMW E34 Saloon 525i RH Drive Auto M20 Engine Manufacter Year 1989 Nov Now the fun part your Model used capacitors not batteries apparently (top right of the cluster I am told) they can be replaced and no recoding to avoid a Tamper dot by the miles recorded. First check is does your cluster have a Grey back if so it should be straight forward (I am told, never done it myself) Apparently the same cluster was used in the 7 series and can be swapped but then you will either need to move the coded plug (Brown Cable) needs swapping or re-code the cluster If the back is Black or another colour replacement is the way to go I don't know if this helps or not Dave
      Greydog in BMW 5 Series Forum
    5. 0

      PDC parking error

      Hi, my first post and would dearly like some advice please. The other day, had the dreaded 'bong' sound and an error message on the screen saying the PDC system wasn't working along with the PDC button flashing green. After hitting OK the parking screen shows sensors, front and back greyed out. So far I have... Checked the fuse which is fine. Cleaned the sensors. Listened to all sensors. No sound coming from any of them. Inspected the module in the boot. No water ingress, no corrosion on the contacts and no dirt or visible damage to the board, looks perfect. The fact that no sensors are making any noise makes me think its the module but as I say it looks perfect. Are these easily checked? Unlikely that all 8 sensors have failed simultaneously or indeed the front and back wiring looms. Any experience of similar or advice would be very much appreciated. Thanks in advance
      NFNICK in BMW X1 Series Forum

  • Recent Achievements


×
×
  • Create New...

Forums

News

Membership