Jump to content
Ad: Genuine BMW parts & accessories from the BMW official store on eBay ×

Cc-Id 24 Fault Code

davyrobo

By davyrobo,
in BMW 3 Series Forum

 Share

Recommended Posts

davyrobo Newbie

davyrobo

Posted
Posted

Hi Guys

I have an ABS fault showing on my dash. I have took the car to my local indy who has gave me the bad news that the fault code CC-ID24 that is on my dash shows when plugged in to be the ABS hydraulic pump that has failed and will probably cost around £1600. Does anyone have any advice. My indy said there are repair kits available but because its a hard fault and not disappearing when ignition is off that its more than likely the pump and that means full unit at big price.

Thanks for any advice

Latest Deals

BMW Official Store for genuine BMW parts & accessories

Disclaimer: As the club is an eBay Partner, The club may be compensated if you make a purchase via eBay links

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing




  • Latest Topics

    1. 13

      Copy Ignition Key?

      Stu, this is tremendously helpful, can't thank you enough. I've ordered the unit from AZ. I'll update you on the results. Thank you. Norm.
      • 1
      • Thanks
      Norrimac in BMW X5 Series Forum
    2. 1

      Newbie here

      Morning Geoff Welcome to the Forum ENJOY your Beemer Dave
      Greydog in New Members Welcome
    3. 1

      Appears no fire

      Morning Larry Welcome to the Forum Sorry I can't hear the recording However your 539i runs with iBus so tracing faults with a BMW friendly diagnostic program (preferably INPA or BMW 1.4.0) so first step get a Diagnostic done. Checks to do first would be. Compression Check, Fuel Pressure at the injector rail. Fuel Pump relay, Vanos sensor and obviously is there a spark at the plugs. If you have compression fuel and spark it should at least try to start even if the Vanos timing is out Is the MAF plugged in and OK Good Luck Dave
      Greydog in BMW 5 Series Forum
    4. 1

      Appears no fire

      I have a 2002 BMW 530I. My wife was driving one night and a water hose busted it ran hot for a short time. The car was in worse condition than it appeared at the time of purchase. But she got water back in it plus oil. Well it still would crank. I got it towed to my house. My first thought was the head gasket, but the oil was clear. So I noticed the head cover gasket busted so I replaced. I also replaced the plugs and coil ok. I’ve checked the fuel filter and the intake gasket among other things inside and out. I’m stumped I’m hoping someone can help with ideas or the answer to it. Listen to the sound and see if something comes to mind.https://drive.google.com/drive/folders/13BYZ1qjO4VuNf7T0iou5AWnqJ70k0wxi
      Larry36 in BMW 5 Series Forum
    5. 12

      X1 2024 Recall pillar problem

      From what I have been able to learn, seems like it was only vehicles manufactured between 17th Sept 2024 and 21st Oct 2024 that may have been affected. Our car entered the manufacturing process on 20th Sept, so I am worried that it will be one with the B-Pillar made from incorrect materials.
      Graham J in BMW X1 Series Forum

  • Recent Achievements

    • Week One Done
      Drumj
      Drumj earned a badge
      Week One Done
    • Conversation Starter
      Larry36
      Larry36 earned a badge
      Conversation Starter
    • First Post
      Graham J
      Graham J earned a badge
      First Post
    • Conversation Starter
      Sogra
      Sogra earned a badge
      Conversation Starter
    • Week One Done
      Tyrese sordam
      Tyrese sordam earned a badge
      Week One Done

×
×
  • Create New...

Forums

News

Membership