Jump to content
Ad: Genuine BMW parts & accessories from the BMW official store on eBay ×

Clonking

Ollie boy

By Ollie boy,
in New Members Welcome

 Share

Recommended Posts

Ollie boy Rookie

Ollie boy

Posted
Posted

Can front brake pads differ in size ? As mine seem to be clonking when i brake . They sound like they are hitting the carrier and when I removed brake pads to inspect they seem very loose fit . Thanks

Bimmer Owners' Club Proficient

Bimmer Owners' Club

Posted
Posted

Hi Richard...welcome to the Forum

Sounds like a new fitting kit is required to take up the clearance between the pads and the carrier but allowing it to slide sideways with ease. Worthwhile applying Copperslip when assembling.

Let us know how it all progresses

Cheers   Trevor

Ollie boy Rookie

Ollie boy

Posted
  • Author
Posted

Got new pads on order as checked against ones at local mechanic and mine are about 4 cm bigger allowing the pads to clink against carrier 

Latest Deals

BMW Official Store for genuine BMW parts & accessories

Disclaimer: As the club is an eBay Partner, The club may be compensated if you make a purchase via eBay links

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing




  • Latest Topics

    1. 0

      Rough idle problem

      Looking for some help. 2010 116i M sport with the 2.0na engine. When cold, car ticks over perfectly. After about 15 mins of driving when idling you can feel it getting a little bit rough. Nothing too bad, but the longer you idle the worse it gets. No EML. When running car runs perfectly not a flicker. Today left it idling for 10mins after I felt it and then revs started to fluctuate but still no eml. OBD scanner can’t pick anything up. Turned it off and back on and was still rough but only a little bit like when it just starts. Anyone had anything similar or can point me in a direction of where I should start looking?
      BLM06 in BMW 1 Series Forum
    2. 0

      E53 petrol fail safe again.

      Right… changed the throttle body, now goes like stink… didn’t start… new battery, now starts and goes like stink…. now drops into fail safe and says the idle valve is mechanically stuck open. where is it, how much is it… can I kick it?
      X5smw in BMW X5 Series Forum
    3. 2

      3.0i starter motor

      I stand corrected…. It wasn’t the starter. I could hear it clicking so checked the battery, amps were about 10… new battery and fired straight up…. So much for Halfords and yuasa battery testing! ….now to the next issue…
      X5smw in BMW X5 Series Forum
    4. 0

      Bmw x1 2012 won't start

      I recently had a problem with my bmw x1 2012, failed to start,fault code came up , got the foot control module and battery replacement, not even two days of driving the car won't start again and the engine light is on .mechanic is now saying it's the starter
      Marvin chui in BMW X1 Series Forum
    5. 6

      X3 2.0 automatic

      Many thanks for the help I've hot the car booked in for a full health check but it seem that the transfer box oil as not been changed for nearly 3 years so I'm hoing to do that first to see if it helps
      Davesally in BMW X3 Series Forum

  • Recent Achievements

    • Conversation Starter
      BLM06
      BLM06 earned a badge
      Conversation Starter
    • Conversation Starter
      Marvin chui
      Marvin chui earned a badge
      Conversation Starter
    • Week One Done
      Davesally
      Davesally earned a badge
      Week One Done
    • One Year In
      Backmarker
      Backmarker earned a badge
      One Year In
    • Week One Done
      Karlos70
      Karlos70 earned a badge
      Week One Done

×
×
  • Create New...

Forums

News

Membership