Jump to content
Ad: Genuine BMW parts & accessories from the BMW official store on eBay ×

Common Oil Leak 2.2 E46 Coupe

phil67

By phil67,
in BMW 3 Series Forum

 Share

Recommended Posts

phil67 Community Regular

phil67

Posted
Posted

Just been and had a look at an 05 320ci Coupe with a 2.2 engine, the thing im concerned about was the amount of oil on the cross member and the suspension arms, I couldn't get under the car enough to see how far it had spread or where it was leaking from, so are there any know leak issues on the 2.2 , it could be an easy fix or a walk away and keep looking

Link to comment
Share on other sites
Bimmer Owners Club Grand Master

Bimmer Owners Club

Posted
Posted

Personally, I would walk away from it....but no guarantee that another one may not have been 'cleaned up' ready for sale and essentially hidden any evidence of leaks, etc

Could be something like front or rear crank seal or even from further up the engine, either way it will involve work and £s

Link to comment
Share on other sites

Latest Deals

BMW Official Store for genuine BMW parts & accessories

Disclaimer: As the club is an eBay Partner, The club may be compensated if you make a purchase via eBay links

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing




  • Latest Topics

    1. 1

      BMW 125i E88 - Passenger Mirror Fault (RHD)

      Morning Aleem Welcome to the Forum I have seen this code before if my old brain is working right it is the glass heating element it's connections or wiring (2 white wires if I recall). So I am afraid you need to start by removing the mirror and checking all connections I have seen one that needed a new mirror and one that had a broken wire at the door to body point Good Luck Dave
      Greydog in BMW 1 Series Forum
    2. 1

      BMW 125i E88 - Passenger Mirror Fault (RHD)

      Hi all, During some fault diagnosing, I've come across a fault (009CC4) on the passenger mirror side (UK). It apparently has to do with some comms being disturbed. I've tried to clear the fault but it keeps returning. I'm wondering if the fix is to replace the glass or to somehow check if there is power at the connectors that plug into the glass. Not sure how to check if there is power going into the glass, so my first reaction would be just to replace the glass, but then again without knowing the cause it may not solve the problem. If anyone has come across the cause and fix for this then I'd appreciate some help please. Thanks
      AAJS in BMW 1 Series Forum
    3. 6

      LED adaptive headlight / high beam failure warning

      Karl If you have a seized level sensor arm either change it or lubricate it as it really could be your issue. Fix faults first other wise trying to reset Fault Codes is a waste of time as they will just return. As I understand it each Headlamp has 3 modules (1) a main Headlamp module (2) a Headlamp Control Module (3) a Cornering Module make sure the plugs are clean unplug them a spray with Contact Cleaner and reconnect making sure they are seated correctly Then try disconnecting the battery to clear faults Dave
      • 1
      • Like
      Greydog in The Owners Club General Discussions
    4. 6

      LED adaptive headlight / high beam failure warning

      Evening, I'll be disconnecting the battery in the morning and will report back. Flashing the high beam a dozen times clears the error. Also the last vehicle check report shows rear headlamp levelling sensor rod seized. Maybe a cause. I'll check the directory if battery disconnection doesn't do the trick. Cheers Karl
      Karlos70 in The Owners Club General Discussions
    5. 6

      LED adaptive headlight / high beam failure warning

      I have the same issue on my 340i (17 plate). It first started last winter occasionally. No problems during the summer, but now it is every time it rains or has rained, particularly if cold and dark. If I use high beam it works fine, but then I may start to get adaptive headlight failure warning (again as far as I can see the adaptive headlights still work). Would love to know if disconnecting the battery works. I figured a loose connection or that a rodent keeping itself warm in my engine bay has had one nibble too many on one of the wires. Cheers Gareth
      G1000 in The Owners Club General Discussions

  • Recent Achievements

    • Reacting Well
      G1000
      G1000 earned a badge
      Reacting Well
    • Week One Done
      AAJS
      AAJS earned a badge
      Week One Done
    • One Month Later
      AAJS
      AAJS earned a badge
      One Month Later
    • First Post
      G1000
      G1000 earned a badge
      First Post
    • Conversation Starter
      Paul Ibb
      Paul Ibb earned a badge
      Conversation Starter

×
×
  • Create New...

Forums

News

Membership