Jump to content
Ad: Genuine BMW parts & accessories from the BMW official store on eBay ×

E36 convertable

Jim666

By Jim666,
in BMW 3 Series Forum

 Share

Recommended Posts

Jim666 Explorer

Jim666

Posted
Posted

Looking for a clue! My 320 has lost power to windows,roof,mirrors.Have checked fuses all ok did have windows fuse blow some time ago and replaced, Haven’t a clue how to approach this help much appriciated !

Bimmer Owners Club Grand Master

Bimmer Owners Club

Posted
Posted

Hi Jim....welcome to the Forum

If the fuse blew before and you replaced it then it must have an issue somewhere in the electrical system to cause the fuse to blow.

I would check the replacement fuse hasn't blown and also disconnect components until you eliminate the cause of the overload.

My guess is one of the window motors is straining (sticking mechanism, etc) which is causing the electrical overload

Greydog Grand Master

Greydog

Posted
Posted

Hi Jim

When you say you have lost power to windows, roof, mirrors does your car have electric seat and steering wheel adjustment? 

I can see windows and mirrors being linked so check check for fuses and relays in the circuit my brother inlaws 530d has had electrical issues which we traced to one of the earth blocks, the main mounting was corroded so several circuits that were earthed through it were giving trouble.

You say roof is your soft top powered? may be a common earth/relay problem.

Have a look at www.newtis.info then look for any mechanical/electrical information wiring diagrams etc if you need parts check www.realoem.com 

Good luck 

Dave

Latest Deals

BMW Official Store for genuine BMW parts & accessories

Disclaimer: As the club is an eBay Partner, The club may be compensated if you make a purchase via eBay links

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing




  • Latest Topics

    1. 2

      Rough idle problem

      Hello Dave thanks for your reply, thanks for the reply and it does sound like that could be the problem. I was thinking injector but never pops an engine light up so wasn’t certain. Was serviced 6500 miles ago but was just oil and filters. Going to check later and see if I can see any visible cracks or splits. Got a friend who has a garage and will obd and smoke test it for me. Billy
      BLM06 in BMW 1 Series Forum
    2. 1

      E53 petrol fail safe again.

      Morning Stu Long time since I played with a straight six so the old memory might be wonky here so check realoem From memory it is linked to the Air Pump and Vacuum control system. Find the Airpump and follow the Vac lines to the rear of the engine you should find a valve with a plug on top (or end) first make sure all lines are good no splits or cracks check the valve is operating, dont forget there is a non return vale in the system close to the inlet manifold. Hope this helps Dave
      Greydog in BMW X5 Series Forum
    3. 1

      Water leak at sharkfin aerial

      Morning Vic New one to me but I guess anywhere there is a joint is suspect. Like the seals around the rear lights that suddenly start to leak, removing them a good clean and renewing the seals seems to work. Check www.realoem.com to see what is fitted and how Dave
      Greydog in BMW 4 Series Forum
    4. 2

      Rough idle problem

      Morning Billy When was the car last serviced ? The symptoms you describe could be due to an air or vacuum leak, old hoses seals and vacuum lines can start to crack when cold they are stiff and don't leak (as much) when hot and flexible you see the issue developing. Your OBD Scanner needs to be BMW capable a standard scanner will only see critical functions. Dave
      Greydog in BMW 1 Series Forum
    5. 2

      Rough idle problem

      Looking for some help. 2010 116i M sport with the 2.0na engine. When cold, car ticks over perfectly. After about 15 mins of driving when idling you can feel it getting a little bit rough. Nothing too bad, but the longer you idle the worse it gets. No EML. When running car runs perfectly not a flicker. Today left it idling for 10mins after I felt it and then revs started to fluctuate but still no eml. OBD scanner can’t pick anything up. Turned it off and back on and was still rough but only a little bit like when it just starts. Anyone had anything similar or can point me in a direction of where I should start looking?
      BLM06 in BMW 1 Series Forum

  • Recent Achievements

    • First Post
      BLM06
      BLM06 earned a badge
      First Post
    • One Year In
      Driverbus70
      Driverbus70 earned a badge
      One Year In
    • Conversation Starter
      BLM06
      BLM06 earned a badge
      Conversation Starter
    • Conversation Starter
      Marvin chui
      Marvin chui earned a badge
      Conversation Starter
    • Week One Done
      Davesally
      Davesally earned a badge
      Week One Done

×
×
  • Create New...

Forums

News

Membership