Unknown connector at the back of 525i engine
-
Latest Topics
-
0
Looking to buy 2014 2.3d
Hey fellas! I really love the look of the X1. Looking to buy an old one from ’14 with 2.3. All service has been done according to the book. Milage is around 200k km. Eveything works. Should I go for it or is this a ticking bomb? Should I go for CX5 instead? appreciate your input -
1
BMW 125i E88 - Passenger Mirror Fault (RHD)
Morning Aleem Welcome to the Forum I have seen this code before if my old brain is working right it is the glass heating element it's connections or wiring (2 white wires if I recall). So I am afraid you need to start by removing the mirror and checking all connections I have seen one that needed a new mirror and one that had a broken wire at the door to body point Good Luck Dave -
1
BMW 125i E88 - Passenger Mirror Fault (RHD)
Hi all, During some fault diagnosing, I've come across a fault (009CC4) on the passenger mirror side (UK). It apparently has to do with some comms being disturbed. I've tried to clear the fault but it keeps returning. I'm wondering if the fix is to replace the glass or to somehow check if there is power at the connectors that plug into the glass. Not sure how to check if there is power going into the glass, so my first reaction would be just to replace the glass, but then again without knowing the cause it may not solve the problem. If anyone has come across the cause and fix for this then I'd appreciate some help please. Thanks -
6
LED adaptive headlight / high beam failure warning
Karl If you have a seized level sensor arm either change it or lubricate it as it really could be your issue. Fix faults first other wise trying to reset Fault Codes is a waste of time as they will just return. As I understand it each Headlamp has 3 modules (1) a main Headlamp module (2) a Headlamp Control Module (3) a Cornering Module make sure the plugs are clean unplug them a spray with Contact Cleaner and reconnect making sure they are seated correctly Then try disconnecting the battery to clear faults Dave- 1
-
6
LED adaptive headlight / high beam failure warning
Evening, I'll be disconnecting the battery in the morning and will report back. Flashing the high beam a dozen times clears the error. Also the last vehicle check report shows rear headlamp levelling sensor rod seized. Maybe a cause. I'll check the directory if battery disconnection doesn't do the trick. Cheers Karl
-
-
Recent Achievements
Recommended Posts
BMW Official Store
Sponsored Ad
Name: eBay
BMW Model: BMW Store
BMW Year: 2024
Latest Deals
BMW Official Store for genuine BMW parts & accessoriesDisclaimer: As the club is an eBay Partner, The club may be compensated if you make a purchase via eBay links
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.