Jump to content
Ad: Genuine BMW parts & accessories from the BMW official store on eBay ×

Vibration damper

e88 vibration damper

By e88 vibration damper,
in BMW 1 Series Forum

 Share

Recommended Posts

Greydog Grand Master

Greydog

Posted
Posted

When you say vibration damper do you mean the main crankshaft pulley on the 4.6 engine it is a 2 piece item bonded together with rubber and sometimes the rubber begins to degrade. 

I had to change mine last year once you have stripped all the stuff out of the way it is a straight forward job I also changed both drive belts tensioners and the water pump 

Damper/pulley was £125 Waterb pump £40 Belts and Tensioners £120 and the job took a Saturday morning with plenty of tea and biscuit breaks

Latest Deals

BMW Official Store for genuine BMW parts & accessories

Disclaimer: As the club is an eBay Partner, The club may be compensated if you make a purchase via eBay links

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing




  • Latest Topics

    1. 0

      E53 petrol fail safe again.

      Right… changed the throttle body, now goes like stink… didn’t start… new battery, now starts and goes like stink…. now drops into fail safe and says the idle valve is mechanically stuck open. where is it, how much is it… can I kick it?
      X5smw in BMW X5 Series Forum
    2. 2

      3.0i starter motor

      I stand corrected…. It wasn’t the starter. I could hear it clicking so checked the battery, amps were about 10… new battery and fired straight up…. So much for Halfords and yuasa battery testing! ….now to the next issue…
      X5smw in BMW X5 Series Forum
    3. 0

      Bmw x1 2012 won't start

      I recently had a problem with my bmw x1 2012, failed to start,fault code came up , got the foot control module and battery replacement, not even two days of driving the car won't start again and the engine light is on .mechanic is now saying it's the starter
      Marvin chui in BMW X1 Series Forum
    4. 6

      X3 2.0 automatic

      Many thanks for the help I've hot the car booked in for a full health check but it seem that the transfer box oil as not been changed for nearly 3 years so I'm hoing to do that first to see if it helps
      Davesally in BMW X3 Series Forum
    5. 6

      X3 2.0 automatic

      hi , I had very similar problem a while back, and after a lot of testing with vista, it turned out to be a front R/H wheel , speed/wheel sensor. when it all was happing lots of codes were coming up gearbox, diff front and back, transever box,plus many more, didn't look good, but there was one code that repeatedly came up at the top of the list, at this point it was becoming undriveable ,it just didn't seem that a wheel sensor could cause all these codes. So I went got two wheel speed sensor, replaced driver side front, the problem never came back, the sensor controls so many systems ,cleared all codes, happy days, I could have pulled the car apart for nothing, and got nowhere, except an empty wallet. hope this helps you or someone.
      ANDYORAC in BMW X3 Series Forum

  • Recent Achievements

    • Conversation Starter
      Marvin chui
      Marvin chui earned a badge
      Conversation Starter
    • Week One Done
      Davesally
      Davesally earned a badge
      Week One Done
    • One Year In
      Backmarker
      Backmarker earned a badge
      One Year In
    • Week One Done
      Karlos70
      Karlos70 earned a badge
      Week One Done
    • Week One Done
      DDONNY
      DDONNY earned a badge
      Week One Done

×
×
  • Create New...

Forums

News

Membership