BMW 1.4.0 Scanner

[Matt2306]

Hi, recently bought an 05 X5 3.0D sport, love it so far and have enjoyed sorting out a few problems with replacing front suspension arms etc.  Rear bushes still to do which will be another adventure!!!

I was looking at the 1.4.0 scanner on ebay and wonder if it is worth getting, if so what can it be used for?

Cheers Matt

[Greydog]

Morning Matt

Welcome to the Forum

I use BMW 1.4.0 with my X5's since yours was made and have helped a few others folks with different models (3, 5 series and X3) by carrying out a diagnostic read.

You will be able to read codes clear and reset all control modules in the car for your information there are 3 pages depends if all options and accessories were fitted as to how many you will see. You will be able turn on/off functions within the module control also.things like alarm chirp, auto locking etc again a couple of pages of tick box choices.

So my experience with 1.4.0 is good, it's simple to set up is user friendly and gives good information. I use it in conjunction with some websites like www.newtis.info a BMW Technical information site and www.realoem.com a BMW parts site to make certain you get replacements that are going to fit. There is also good information at www.pelicanparts.com great how too's with pictures you won't find much diesel engine information as it is an American site and they still think diesel is only for trucks but everything else is there just the steering is on the wrong side.

Good luck

Dave

[Matt2306]

Thanks Dave, I think it will be worth me grabbing one, they are cheap as chips on the bay 👍👍👍