Jump to content
Ad: Genuine BMW parts & accessories from the BMW official store on eBay ×

BMW X5 E70 rims paint code

CamR75

By CamR75,
in BMW X5 Series Forum

 Share

Recommended Posts

CamR75 Rookie

CamR75

Posted
Posted

Hi

I have some scratches on my X5 rims and want to try and repair myself. Can anyone please tell me the paint code to match the silver of the rims?? Same style as the ones in this picture.

 

Many thanks!

bmw rims.jpg

Greydog Grand Master

Greydog

Posted
Posted

Welcome to the Forum CamR75

Take a lot at one of the Online BMW Vin decoders that will give you the build sheet including the wheels and colour. Take care I remember reading somewhere that all the wheels are finished using a Wurth paint system and often other makes dont match to well.

Dave

CamR75 Rookie

CamR75

Posted
  • Author
Posted

Thanks Dave, all I can find from that is the type of wheel being: BMW LA Wheel, M Double Spoke 333 and when googled it says its a Gloss-turned light alloy rim. No mention of the actual colour to repaint unfortunately.

Greydog Grand Master

Greydog

Posted
Posted

Hi Cameron

If it says "turned" are they machine finish with a lacquer to protect them maybe. Have you talked to a wheel refinisher?

Dave

Latest Deals

BMW Official Store for genuine BMW parts & accessories

Disclaimer: As the club is an eBay Partner, The club may be compensated if you make a purchase via eBay links

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing




  • Latest Topics

    1. 2

      Rough idle problem

      Hello Dave thanks for your reply, thanks for the reply and it does sound like that could be the problem. I was thinking injector but never pops an engine light up so wasn’t certain. Was serviced 6500 miles ago but was just oil and filters. Going to check later and see if I can see any visible cracks or splits. Got a friend who has a garage and will obd and smoke test it for me. Billy
      BLM06 in BMW 1 Series Forum
    2. 1

      E53 petrol fail safe again.

      Morning Stu Long time since I played with a straight six so the old memory might be wonky here so check realoem From memory it is linked to the Air Pump and Vacuum control system. Find the Airpump and follow the Vac lines to the rear of the engine you should find a valve with a plug on top (or end) first make sure all lines are good no splits or cracks check the valve is operating, dont forget there is a non return vale in the system close to the inlet manifold. Hope this helps Dave
      Greydog in BMW X5 Series Forum
    3. 1

      Water leak at sharkfin aerial

      Morning Vic New one to me but I guess anywhere there is a joint is suspect. Like the seals around the rear lights that suddenly start to leak, removing them a good clean and renewing the seals seems to work. Check www.realoem.com to see what is fitted and how Dave
      Greydog in BMW 4 Series Forum
    4. 2

      Rough idle problem

      Morning Billy When was the car last serviced ? The symptoms you describe could be due to an air or vacuum leak, old hoses seals and vacuum lines can start to crack when cold they are stiff and don't leak (as much) when hot and flexible you see the issue developing. Your OBD Scanner needs to be BMW capable a standard scanner will only see critical functions. Dave
      Greydog in BMW 1 Series Forum
    5. 2

      Rough idle problem

      Looking for some help. 2010 116i M sport with the 2.0na engine. When cold, car ticks over perfectly. After about 15 mins of driving when idling you can feel it getting a little bit rough. Nothing too bad, but the longer you idle the worse it gets. No EML. When running car runs perfectly not a flicker. Today left it idling for 10mins after I felt it and then revs started to fluctuate but still no eml. OBD scanner can’t pick anything up. Turned it off and back on and was still rough but only a little bit like when it just starts. Anyone had anything similar or can point me in a direction of where I should start looking?
      BLM06 in BMW 1 Series Forum

  • Recent Achievements

    • First Post
      BLM06
      BLM06 earned a badge
      First Post
    • One Year In
      Driverbus70
      Driverbus70 earned a badge
      One Year In
    • Conversation Starter
      BLM06
      BLM06 earned a badge
      Conversation Starter
    • Conversation Starter
      Marvin chui
      Marvin chui earned a badge
      Conversation Starter
    • Week One Done
      Davesally
      Davesally earned a badge
      Week One Done

×
×
  • Create New...

Forums

News

Membership