Jump to content

Recommended Posts

Posted

Ive got problems with my  09 1 series cold start only. Starts from cold missing and very rough idle and black smoke out the back unburnt fuel . Plugged it in and ive got PO300-301-302-303-304 witch is cylinder misfire so in went a set of plugs the old ones were shot and well worn. The other code was P124C (Nitrogen Oxide Sensor Operating Readiness Signal Not Available At Start) so i put in a pre CAT lambda sensor. Its starts better but not 100% for sure. Its great when warm/hot. 

Has anyone else come across this problem ...  

Posted

Afternoon Giles

Welcome to the Forum

I daresay the Crank Case Ventilation system will be sooted up, check all the Vacuum lines and replace if clogged. The last thing would be Coil Packs 

A diagnostic session with INPA?ISTA would tell you much more.

Dave

Latest Deals

BMW Official Store for genuine BMW parts & accessories

Disclaimer: As the club is an eBay Partner, The club may be compensated if you make a purchase via eBay links

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.





  • Latest Topics

    1. 0

      Access to Battery terminals on BMW 1 Series 2020

    2. 0

      Remove front seat back panel for BMW 1 series 2020 118i

    3. 3

      Rough idle problem

    4. 3

      Rough idle problem

    5. 1

      E53 petrol fail safe again.

  • Recent Achievements

    • Max123 earned a badge
      Conversation Starter
    • BLM06 earned a badge
      First Post
    • Driverbus70 earned a badge
      One Year In
    • BLM06 earned a badge
      Conversation Starter
    • Marvin chui earned a badge
      Conversation Starter

×
×
  • Create New...

Forums


News


Membership