Jump to content

Recommended Posts

Posted

Morning Stewart

What are you trying to achieve by fitting a vacuum gauge ? You have the MPG gauge already fitted surely a vacuum gauge will only convert that to numbers ?

Stirring up the old grey matter there were blanked off ports on the back of the inlet manifold which would be my choice, have a feel 

Dave

Posted

Hi Dave,

I had a couple of spare gauges and the front console area looks a bit sad, so I installed a oil pressure, voltmeter and vacuum gauge. That said as this car is an unknown quantity to me having bought it without seeing it and importing to France, I would like to keep an on the overall condition. I have just being using the Foxwell analyzer 530 and it has proved invaluable  dealing with the transmission issues I was having.

Stewart

Posted

Afternoon Stewart

If you had the gauges and they give the information you need then why not 

If you have an old lap top the BMW 1.4.0 as a diagnostic program should give you everything you need and on the plus side its Cheap about £15 

I use it on all Ibus based BMW's  it allows re-setting of all Fault codes plus it will give access to all control units. If after 2008 vintage then INPA?ISTA is the go to both programs give Dealer level information and access.

Enjoy

Dave

Posted

Hi Dave,

I have just bought Foxwell NT530 and it is superb. Living in France and trying to get bits and pieces is difficult as they are not big on anything diy. I am trying to find a vacuum take off point on the inlet manifold to tap into. The gauges also add a bit of bling to the inside. 

Stewart

  • 2 weeks later...
Posted

Hi Stewart 

I believe there are take off points at the back (bulkhead) end of the manifold that have plugs fitted

Dave

  • 9 months later...
Posted
On 11/4/2021 at 3:51 PM, Greydog said:

Industry's Best HVAC Equipment Brands and wide range of HVAC products
Specialized in Providing the Best Price and Best Service.

When it comes to HVAC equipment and refrigeration supplies, HVAC Shop has everything you need.

Visit: www.hvacshop.com.au
 

 

Posted

Morning 

The original post was about measuring Manifold depression/vacuum 

Nothing at all to do with the climate control or AC system ??

 

Latest Deals

BMW Official Store for genuine BMW parts & accessories

Disclaimer: As the club is an eBay Partner, The club may be compensated if you make a purchase via eBay links

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.





  • Latest Topics

    1. 3

      Rough idle problem

    2. 3

      Rough idle problem

    3. 1

      E53 petrol fail safe again.

    4. 1

      Water leak at sharkfin aerial

    5. 3

      Rough idle problem

  • Recent Achievements

    • BLM06 earned a badge
      First Post
    • Driverbus70 earned a badge
      One Year In
    • BLM06 earned a badge
      Conversation Starter
    • Marvin chui earned a badge
      Conversation Starter
    • Davesally earned a badge
      Week One Done

×
×
  • Create New...

Forums


News


Membership