Jump to content
Ad: Genuine BMW parts & accessories from the BMW official store on eBay ×

Side Panel Lights - Moisture ingress and Bulb Specification

jenksy0198

By jenksy0198,
in BMW 6 Series Forum

 Share

Recommended Posts

jenksy0198 Enthusiast

jenksy0198

Posted
Posted

Hi all, looks like I have a seal failure as moisture looks like it is in the side panel light on one side of the E64. Where would I find the bulb spec for this light? Are they readily available.

The actual bulb holder may also need to be replaced but cannot find any new, only used. Any pointes on buying new ones as I am suspecting the seal will go on used ones and I then have the same problem.

 

Any advice gratefully received.

 

Paul 

Latest Deals

BMW Official Store for genuine BMW parts & accessories

Disclaimer: As the club is an eBay Partner, The club may be compensated if you make a purchase via eBay links

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing




  • Latest Topics

    1. 1

      Z3 airbag wiring,

      Hi. Do you have a light on the dash? It could be that someone fitted an emulator ?
      X5smw in BMW Z3 & Z4 Series Forum
    2. 1

      Z3 airbag wiring,

      I'm am sorry if I am doing this incorrectly but I have searched and not found anything related to this but I am still learning all of this. Does anyone know about the yellow airbag/ seat belt connector under the driver’s seat? I am sure the previous owner has changed this but I am wondering if anyone has seen this before? If so, should I remove the butt connectors and solder the wires? Should the wires be twisted all the way to the yellow connector? Any help is greatly appreciated. Thanks, JayMe
      JayMe in BMW Z3 & Z4 Series Forum
    3. 0

      Connectors in the boot next to the battery

      Hi - I have a 2007 1.6L Petrol 1 series and it has wire connectors in the boot near the battery but I don't know what they are meant to connect to. Are they just spare or is there a part missing? The car currently not starting but we think it is a BCM fault but just wanted to know what the cables in the boot are meant for. Any help would be greatly appreciated be gratefully appreciated as we can't read the fault codes as we think the BCM is faulty and the car won't idle properly but there might be some other issue. Regards Andrew
      Andrewkuk in BMW 1 Series Forum
    4. 2

      Access to Battery terminals on BMW 1 Series 2020

      Hi Dave, Great, very helpful. Many thanks.
      Max123 in BMW 1 Series Forum
    5. 1

      Bmw x1 2012 won't start

      Morning Marvin You need a Diagnostic Scan with a BMW capable system , I assume that when the Footwell control module and and Battery were replaced they were correctly registered to your chassis ? Has your Mechanic checked the starter solenoid ? much cheaper than a starter Hope this helps Dave
      Greydog in BMW X1 Series Forum

  • Recent Achievements

    • Conversation Starter
      JayMe
      JayMe earned a badge
      Conversation Starter
    • Conversation Starter
      Andrewkuk
      Andrewkuk earned a badge
      Conversation Starter
    • One Month Later
      DAW90
      DAW90 earned a badge
      One Month Later
    • First Post
      Max123
      Max123 earned a badge
      First Post
    • Conversation Starter
      Max123
      Max123 earned a badge
      Conversation Starter

×
×
  • Create New...

Forums

News

Membership