Remove wiper motor

[elder rebel]

My wipers are causing problems

Left side wiper support is faulty.

ie you can shake the base of the arm quite a lot and base of arm hits edge of hood.

I am told there is some sort of support bearing below the bulkhead.

How do i get to that ??

[Greydog]

Morning Ron 

Welcome to the Forum

First as far as I am aware the wiper motor is mounted to the scuttle accessed by removing trim in the engine bay. Before going to the complete strip down have you checked (A) the wiper arm mount and nut, and (B) the big nut (22mm or 24mm) that secures the wiper mechanism to the scuttle on that side just in case its loose. My guess is that will be the problem

Check www.realoem.com put the last 7 digits of your Vin into the search box it will bring up your model, then search the trim or body sections for any help with how it fits

Another source would be You-tube there are some good how to's on there though take care some are not so good

Good Luck

Dave