Jump to content

Recommended Posts

Posted

Right… changed the throttle body, now goes like stink… 

didn’t start… new battery, now starts and goes like stink….

now drops into fail safe and says the idle valve is mechanically stuck open.

where is it, how much is it… can I kick it? 
 

 

IMG_0132.jpeg

IMG_0133.jpeg

Posted

Morning Stu

Long time since I played with a straight six so the old memory might be wonky here so check realoem

From memory it is linked to the Air Pump and Vacuum control system. Find the Airpump and follow the Vac lines to the rear of the engine you should find a valve with a plug on top (or end) first make sure all lines are good no splits or cracks check the valve is operating, dont forget there is a non return vale in the system close to the inlet manifold. 

Hope this helps

Dave

Posted

Right, changed it… it’s a bit of a faff, but basically remove the airbox and everything into the throttle body and there it is. 
took it for a run and all seems nice…

starts to come home and it suddenly goes into fail safe mode and loses all power again… 

gets it home and revs are all over the place. Computer says throttle position sensor Issue!.

I have already replaced the throttle body. 
I’ll take it for another run later. 🙄😩

Posted

Update… took it for a run today and it did 30 miles without an issue… then the check engine light came on, no loss of power… got home and it’s telling me banks 1 and 2 running outside tolerances. 
put a new MAF sensor on which I bought this week. Let’s see what the next test run does! 

Posted

Also noticed I have no headlight indicator on the dash now (blue high beam works) and the intermittent wipers have stopped! Lol

Posted

Morning

Symptoms could point towards the Footwell Control Module or it's Earth point 

Dave

  • Thanks 1
  • 2 weeks later...
Posted

Yet again, it’s dropping into fail safe mode.  Drives fine, then it’s like a misfire…. Then fail safe, the three yellow lights and no power and stuttering… 

Got home and the revs are all over on idle. Little scanner showing the throttle position controller jammed… 

it’s so far had a new throttle body, new idle control valve, new battery,  new maf… 

 

luckily I wasn’t on a motorway this time! 

 

IMG_0450.jpeg

Latest Deals

BMW Official Store for genuine BMW parts & accessories

Disclaimer: As the club is an eBay Partner, The club may be compensated if you make a purchase via eBay links

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.





  • Latest Topics

    1. 0

      Media screen

    2. 7

      E53 petrol fail safe again.

    3. 20

      SLIPPING CLUTCH

    4. 1

      BMW 2009 325SE Auto

  • Recent Achievements

    • Dj79794 earned a badge
      One Month Later
    • Bmwowner1 earned a badge
      Conversation Starter
    • auckwads earned a badge
      One Month Later
    • Grogu earned a badge
      Conversation Starter
    • Grogu earned a badge
      First Post

×
×
  • Create New...

Forums


News


Membership