-
Latest Topics
-
10
Instrument cluster suddenly died
A little additional information BMW do not repair anything a Dealer would simply change the cluster and re-code the new one The DIY engineers out there have put a surprising amount of information online which should help your Auto Electrician Good Luck Dave -
1
Tailgate programming soft close
Hi Chris First one is pretty straight foward Coding Data, Second = operation/service, Third = Energy/Power (guessing here) Fourth= Block Detection (similar to windows), Fifth I think is Protection (may be here you find soft close) Six says what it is (could also be where you find what you need) Seven = Regulation (could also be what you need) Last is Diagnostics or Diagnosis (I wpold check there first in case a reset sots it) Hope that helps, my ISTA/INPA gives all in english so easier to use never looked at tailgate programming Diagnostics should let you know if it is the close sensor or programming Good Luck Dave -
10
Instrument cluster suddenly died
Many thanks once again Greydog Dave . I haven't yet contacted my auto electrician friend but when I do I'm sure he will find your information useful and interesting. He will take a while to visit me because of ill health but when he does I will contact you. Many thanks and a happy new year.- 1
-
-
1
Tailgate programming soft close
Apologies if this has been broached already but I did do a search. I am looking for help to try and recode the tailgate on my X3 F25 2016 model. The tailgate slams shut and is a bit concerning. I believe it can be programmed to do a soft close. I have looked on my Bimmercode app but cannot see where to alter the setting. Its all in German of course. Below is the menu after selecting Tailghate Module. Any help appreciated. -
1
PDC parking error
Morning Nick Welcome to the Forum Normally it will be one or two sensors that fail as you say, I would go back and test the sensors again. PDC on then ligtly touch each sensor with an ear close you should hear clicking and feel a light vibration. I would have a spare sensor to swap in the event you find a non responsive one (the trick is being able to get at the sensors) If a sensor is swapped and remains unresponsive check the loom from that sensor to the next for continuity. Good Luck Dave
-
-
Recent Achievements
-
Recommended Posts
BMW Official Store
Sponsored Ad
Name: eBay
BMW Model: BMW Store
BMW Year: 2024
Latest Deals
BMW Official Store for genuine BMW parts & accessoriesDisclaimer: As the club is an eBay Partner, The club may be compensated if you make a purchase via eBay links
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.