Jump to content
Ad: Genuine BMW parts & accessories from the BMW official store on eBay ×

Z4 Sticky Steering

JRH406

By JRH406,
in BMW Z3 & Z4 Series Forum

 Share

Recommended Posts

JRH406 Newbie

JRH406

Posted
Posted

I have just bought a 2005 Z4 and I very quickly encountered an issue with the steering where it loses it's fluidity and makes the wheel more difficult to move. I encountered this whilst driving with the hood down and the climate control on hot. I went on the internet to see whether this was a common occurance and actually found lots of threads titled "Z4 sticky steering" on various different sites. People having experienced the same problem, but surprisingly no references on this site.

From reading the threads I know in the US that there has been an acceptance with BMW dealers that there is an issue. Evidently it is because the ECU, which is attached to the steering column, is too sensitive to heat, unfortunately this sits just behind the heater vent to the right of your steering wheel. The only remedy is to change the Steering Column for a later model.

I phoned my local BMW dealer in Bournemouth and they had never come across this before ? Does anyone know of any UK precedence on this please ?

Love the car by the way but this is dertacting from the experience and I feel downright dangerous.

Many thanks

Guest Mister Dabsy

Guest Mister Dabsy

Posted
Posted

That model may have had a "Recall" notification ... Gonna have a quick look ...

Added

Sorry, the only recall on the Z4 was for a dodgy Fuel Pump...

IMHO.. If the steering system has an ECU then it must have sensors too, get a workshop manual and hunt them down and firstly check conns and condition then maybe find a way of testing...

Just a thought mate.

Latest Deals

BMW Official Store for genuine BMW parts & accessories

Disclaimer: As the club is an eBay Partner, The club may be compensated if you make a purchase via eBay links

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing




  • Latest Topics

    1. 7

      105C thermostat replacement

      As I understand the wiring diagrams and operation Item 9 on the thermostat housing is the sensor which sends its signal to the ECU for interpretation with information from the map sensor. Information from item 12 (1st drawing ) is also used to provide average temp across the cooling system. As far as I am aware the Thermostst is independent of the sensors and operated by expanding wax material internally
      Greydog in BMW 7 Series Forum
    2. 13

      BMW 318i boot locked can’t get into

      Errr not clear here Donald Plastic "L's" with short rubber hoses ??? Distilled water/Ionised water should only be used in an old style lead acid battery. The Rad and engine coolining system should be filled with the correct coolant mix to prevent cavitation and the danger of freezing in low temps. Coolant should be part of the cars regular maintenance and changed every 3 years or so. At that time all hoses and connectors should be inspected and changed where necessary to keep everything in tip top condition. Changing parts can cause as many problems as you may think your solving
      Greydog in BMW 3 Series Forum
    3. 13

      BMW 318i boot locked can’t get into

      Update: I checked my battery and it charged in 5 minutes, so I don't have to find another alternator. All seems to be OK except for the plastic "L"s with a short rubber hose that bypass the HV/AC solenoid. Those get clogged after @ 150,000-190,000 miles (if distilled water wasn't used) and cause air pockets that try to burst radiators. I have a few more brass "L"s, so now I can throw the plastic ones away. I have to be careful I don't fog the windows though, without heat or cool.
      DDONNY in BMW 3 Series Forum
    4. 7

      105C thermostat replacement

      You are absolutely right. The strange thing is that when I put the chassis number on the realoem it shows that the temp sensor is not applicable on my vehicle. I will physically check for a sensor. In the meantime, do you think that the removal of the MAP activated thermostat will effect the temp gauge on the dial instrument item 6? I am tempted to add a dummy resistor , 11.5ohms - 13watts , to simulate the MAP thermostat. Your thoughts?
      Dimitris in BMW 7 Series Forum
    5. 14

      X5 e53 reverse sensors video required please

      What's Brazillian for BIG THUD 🤣🤣 Dave
      Greydog in BMW X5 Series Forum

  • Recent Achievements

    • Week One Done
      Karlos70
      Karlos70 earned a badge
      Week One Done
    • Week One Done
      DDONNY
      DDONNY earned a badge
      Week One Done
    • Collaborator
      Dimitris
      Dimitris earned a badge
      Collaborator
    • Week One Done
      DAW90
      DAW90 earned a badge
      Week One Done
    • First Post
      jn1253
      jn1253 earned a badge
      First Post

×
×
  • Create New...

Forums

News

Membership