Jump to content
Ad: Genuine BMW parts & accessories from the BMW official store on eBay ×

Gearchange Issues

AndyG72
 Share

Recommended Posts

AndyG72 Enthusiast

AndyG72

Posted
Posted

Its the 3rd time its happened now i drive off average speed and then the car goes into neutral, and then after trying to select a gear it goes into 1st, but when i pull away it goes into neutral, and then the next time it goes into 1st i change it to 2nd and pull away, but it wont let me select 4th/5th, but after a few minutes in will let me use 1st again.

Ive put a more powerful battery in and ive change the FSR(nothing to do with it really), but in the haynes manual it says check the tranny oil but it doesnt say where.

What else could it be?.

Guest Mister Dabsy

Guest Mister Dabsy

Posted
Posted

Low or dirty gearbox oil could be the culprit...

Daft question, but is it auto or manual?

AndyG72 Enthusiast

AndyG72

Posted
  • Author
Posted

Low or dirty gearbox oil could be the culprit...

Daft question, but is it auto or manual?

Auto and its got SSG paddle thingys

Guest Mister Dabsy

Guest Mister Dabsy

Posted
Posted

Did you know, SSG is out of my league TBH - I don't like it much - should've left that system for the track, but still check the obvious suspects like ...

Engine/camshaft speed sensors etc, oil level and quality, cables at throttle body and maybe try to get a fault code...

But if a gearbox decides it doesn't want a particular gear, then it has either been told by the ECU, told by the driver or selector forks are worn (Mainly manual)...

Sorry I couldn't help you more !

AndyG72 Enthusiast

AndyG72

Posted
  • Author
Posted

No probs, you cant know everything but it would help.

Somebody has just told me they had the same problem, and it needed tranny oil top up, but i thought that it was a lifetime thing.

Guest Mister Dabsy

Guest Mister Dabsy

Posted
Posted

Not always, Andy... In an ideal world 'n all that...

Check it anyway mukka...

AndyG72 Enthusiast

AndyG72

Posted
  • Author
Posted

Not always, Andy... In an ideal world 'n all that...

Check it anyway mukka...

Im going to try and book it in for an oil level check and top up if needed tomorrow, if they can book me in but the will most likely put any old crap in.

I will let you know what happens.

Guest Mister Dabsy

Guest Mister Dabsy

Posted
Posted

No, Andy... You can check it yourself to save some coin...

There are plugs on the top, bottom and side...

The side one is the level - if you dont get a little seapage then its low... If you get seapage then it should be light brownish NOT BLACK.

The bottom is Drain - If you need to change...

The top (I think) is where the gasket could fail (weakspot).... Correction will come soon, eh?

DAZ

AndyG72 Enthusiast

AndyG72

Posted
  • Author
Posted

No, Andy... You can check it yourself to save some coin...

There are plugs on the top, bottom and side...

The side one is the level - if you dont get a little seapage then its low... If you get seapage then it should be light brownish NOT BLACK.

The bottom is Drain - If you need to change...

The top (I think) is where the gasket could fail (weakspot).... Correction will come soon, eh?

DAZ

I would like to do it myself but i dont have the time during the week, so hopefully the garage which is 400 yds from work can do it tomorrow because i need the car everyday.

AndyG72 Enthusiast

AndyG72

Posted
  • Author
Posted

The Bm is in a garage and there saying it might be the pump or the relay, so there changing the relay 1st so fingers crossed it's only the relay.

Where's the pump located because hes saying that it's £600 for a pump.

Guest Mister Dabsy

Guest Mister Dabsy

Posted
Posted

A fiver says they tell u its not the relay :angry:

40 quid an hour too? LOL

Wish I was there, Andy !!!

AndyG72 Enthusiast

AndyG72

Posted
  • Author
Posted

A fiver says they tell u its not the relay :angry:

40 quid an hour too? LOL

Wish I was there, Andy !!!

Well when they fit a new relay, i will see how it is and then if it still plays up i will have to think what to do next.

They said the gearbox oil was fine.

  • 2 weeks later...
AndyG72 Enthusiast

AndyG72

Posted
  • Author
Posted

Car still in the garage, the boss phoned me this morning and said they put the new pump on last night and and put in new gearbox oil, and then this morning the noticed a leak from the bell housing, so i thought sod this im going down there, the boss is off today and i had a look under the car and the old pump was still on the car and all they have done was replace the relay, there dropping the box to look at the leak and the mechanic said it might be the bearings.

So what do i do now?.

G4VHD Grand Master

G4VHD

Posted
Posted

Update is that its the Actuator thats leaking, £600+

Oh bad luck dude, sorry to hear that.

AndyG72 Enthusiast

AndyG72

Posted
  • Author
Posted

Finally i have her back, the actuator was p**sing out oil, £600 for the part, oil & vat &labour.

Total £1080

AndyG72 Enthusiast

AndyG72

Posted
  • Author
Posted

wow.unlucky mate.i feel your pain.get a beer down ya neck

I wish i cant afford it now, its times like these i wish i had a credit card.

Bob Rookie

Bob

Posted
Posted

I had another car with the same tyoe of box and the same problem - soooo expensive. The SSG box is good though, i've done over 65000 miles in mine with no bother.

Latest Deals

BMW Official Store for genuine BMW parts & accessories

Disclaimer: As the club is an eBay Partner, The club may be compensated if you make a purchase via eBay links

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing




  • Latest Topics

    1. 7

      105C thermostat replacement

      As I understand the wiring diagrams and operation Item 9 on the thermostat housing is the sensor which sends its signal to the ECU for interpretation with information from the map sensor. Information from item 12 (1st drawing ) is also used to provide average temp across the cooling system. As far as I am aware the Thermostst is independent of the sensors and operated by expanding wax material internally
      Greydog in BMW 7 Series Forum
    2. 13

      BMW 318i boot locked can’t get into

      Errr not clear here Donald Plastic "L's" with short rubber hoses ??? Distilled water/Ionised water should only be used in an old style lead acid battery. The Rad and engine coolining system should be filled with the correct coolant mix to prevent cavitation and the danger of freezing in low temps. Coolant should be part of the cars regular maintenance and changed every 3 years or so. At that time all hoses and connectors should be inspected and changed where necessary to keep everything in tip top condition. Changing parts can cause as many problems as you may think your solving
      Greydog in BMW 3 Series Forum
    3. 13

      BMW 318i boot locked can’t get into

      Update: I checked my battery and it charged in 5 minutes, so I don't have to find another alternator. All seems to be OK except for the plastic "L"s with a short rubber hose that bypass the HV/AC solenoid. Those get clogged after @ 150,000-190,000 miles (if distilled water wasn't used) and cause air pockets that try to burst radiators. I have a few more brass "L"s, so now I can throw the plastic ones away. I have to be careful I don't fog the windows though, without heat or cool.
      DDONNY in BMW 3 Series Forum
    4. 7

      105C thermostat replacement

      You are absolutely right. The strange thing is that when I put the chassis number on the realoem it shows that the temp sensor is not applicable on my vehicle. I will physically check for a sensor. In the meantime, do you think that the removal of the MAP activated thermostat will effect the temp gauge on the dial instrument item 6? I am tempted to add a dummy resistor , 11.5ohms - 13watts , to simulate the MAP thermostat. Your thoughts?
      Dimitris in BMW 7 Series Forum
    5. 14

      X5 e53 reverse sensors video required please

      What's Brazillian for BIG THUD 🤣🤣 Dave
      Greydog in BMW X5 Series Forum

  • Recent Achievements

    • Week One Done
      Karlos70
      Karlos70 earned a badge
      Week One Done
    • Week One Done
      DDONNY
      DDONNY earned a badge
      Week One Done
    • Collaborator
      Dimitris
      Dimitris earned a badge
      Collaborator
    • Week One Done
      DAW90
      DAW90 earned a badge
      Week One Done
    • First Post
      jn1253
      jn1253 earned a badge
      First Post

×
×
  • Create New...

Forums

News

Membership