Jump to content
Ad: Genuine BMW parts & accessories from the BMW official store on eBay ×

The 46 Is Dead!!!

G4VHD

By G4VHD,
in Wanted

 Share

Recommended Posts

G4VHD Grand Master

G4VHD

Posted
Posted

Done all my running about for everyone else now its holiday time...so she dies..

Running like a bag of bollox, like its on 2 cylinders or something.

Was fine on minute then lost all power, no smoke so don't think its turbo.

Guest DazH

Guest DazH

Posted
Posted

Done all my running about for everyone else now its holiday time...so she dies..

Running like a bag of bollox, like its on 2 cylinders or something.

Was fine on minute then lost all power, no smoke so don't think its turbo.

Ahh ffs Gav. Keep us posted

G4VHD Grand Master

G4VHD

Posted
  • Author
Posted

Its deffo not fireing on all cylinderd, on holiday now so worry about it Tuesday lol.

Oh, got a !Removed! 1.4petrol Mariva as a hire car MACHINE......NOT

Guest Mister Dabsy

Guest Mister Dabsy

Posted
Posted

Sorry to hear that mate... 1st - check (Possibly remove and put back) connections to ALL engine sensors, and be very suspicious of the cam sensor...

Worst case scenario is the diesel pump seals mate...

  • 2 weeks later...
G4VHD Grand Master

G4VHD

Posted
  • Author
Posted

Swirl flap issue...!Removed! things.

Jammed piston, bent valves, came back out and blew hole in inlet manifold!

!Removed! expensive lol..

Cars Hu??

Guest Mister Dabsy

Guest Mister Dabsy

Posted
Posted

Damn those finnicky diesel contraptions :angry:

KES Enthusiast

KES

Posted
Posted

Swirl flap issue...!Removed! things.

Jammed piston, bent valves, came back out and blew hole in inlet manifold!

!Removed! expensive lol..

Cars Hu??

Fark me what a bummer can you rebuild yersen on the plus side I have 4 swirl flaps in a tin if you need one ;)

G4VHD Grand Master

G4VHD

Posted
  • Author
Posted

New manifold mate so won't need them thank you anyway.

Its repairable but very very expansive.

If I hadn't spent so much on her in the last few months I would have given up and called her a write off.

KES Enthusiast

KES

Posted
Posted

New manifold mate so won't need them thank you anyway.

Its repairable but very very expansive.

If I hadn't spent so much on her in the last few months I would have given up and called her a write off.

From what I read it looks like a piston 2 valves manifold topend gasket set and possibily the head crown cleaned up and maybe the valve seats redone if they have marked up . :mellow:

It you look at that link I sent you to the blockoff plates you can see a pick of the damage when it just eats a screw .

http://www.pmwltd.co.uk/?page_id=155

Latest Deals

BMW Official Store for genuine BMW parts & accessories

Disclaimer: As the club is an eBay Partner, The club may be compensated if you make a purchase via eBay links

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing




  • Latest Topics

    1. 0

      Access to Battery terminals on BMW 1 Series 2020

      Hi, Does any one know how to access the Battery terminals on BMW 1 Series 2020, 118I. The battery is in the engine compartment and the red cap is visable, however I want to connections from the battery terminals? Many thanks.
      Max123 in BMW 1 Series Forum
    2. 0

      Remove front seat back panel for BMW 1 series 2020 118i

      Hi , Does anyone know how to remove front seat back panel for BMW 1 series 2020 118i. The are no visble screws or caps? Many thanks.
      Max123 in BMW 1 Series Forum
    3. 3

      Rough idle problem

      Hello Dave, Just an update and I think you may be right. Went out and gave it a few revs when cold, nothing. Let it warm up and there was a loud “shoooo”. I’ve attached a photo of where the sound was coming from. Going to get it looked into but do you have any idea of what it could be? First BMW, always had vag cars so engine are a little different to what I’m used to
      BLM06 in BMW 1 Series Forum
    4. 3

      Rough idle problem

      Hello Dave thanks for your reply, thanks for the reply and it does sound like that could be the problem. I was thinking injector but never pops an engine light up so wasn’t certain. Was serviced 6500 miles ago but was just oil and filters. Going to check later and see if I can see any visible cracks or splits. Got a friend who has a garage and will obd and smoke test it for me. Billy
      BLM06 in BMW 1 Series Forum
    5. 1

      E53 petrol fail safe again.

      Morning Stu Long time since I played with a straight six so the old memory might be wonky here so check realoem From memory it is linked to the Air Pump and Vacuum control system. Find the Airpump and follow the Vac lines to the rear of the engine you should find a valve with a plug on top (or end) first make sure all lines are good no splits or cracks check the valve is operating, dont forget there is a non return vale in the system close to the inlet manifold. Hope this helps Dave
      Greydog in BMW X5 Series Forum

  • Recent Achievements

    • Conversation Starter
      Max123
      Max123 earned a badge
      Conversation Starter
    • First Post
      BLM06
      BLM06 earned a badge
      First Post
    • One Year In
      Driverbus70
      Driverbus70 earned a badge
      One Year In
    • Conversation Starter
      BLM06
      BLM06 earned a badge
      Conversation Starter
    • Conversation Starter
      Marvin chui
      Marvin chui earned a badge
      Conversation Starter

×
×
  • Create New...

Forums

News

Membership