Another Wind Deflector Question

[Zebadee]

Hi Guys,

Apologies if this is a well trodden path but I have search the web far and wide for an answer but only came acorss one option.

I am looking for a wind deflector without wanting to go to the expense of getting roll bars fitted.

My Z3 (2001) has no roll bars but does have two little holes next to the center compartment. Sticking my finger down the hole there feels to be a ring about an inch down. I have tried putting a screw down there and it is about a 10m thread.

I'm thinking I might have to make my own deflector if I can't find something to work.

What are you guys using for a deflector if your model is like mine?

Has anyone here made their own ?

Any advice, comments would be welcome

Thanks

[alwal0307]

i know you asked the question last year but i have only joined today.

i made my wind deflector using a 5mm sheet of perspex two brackets total cost less that £10.

Perspex got of ebay.

there is photos of my car on bimmerforum web site.

[Drewski]

Alwal0307

Do you have the measurements for the Perspex wind deflector pls. I'd like to have a go at making one

Thanx a lot Drew

[Guest Mister Dabsy]

WHY ?

[Drewski]

Found it alwal on bimmerforum

Great pics

[alwal0307]

Hi Drew

Length 550mm

Height 240mm

it was approx 300mm height on the photo but i have reduced it now to 240 which it looks better IMO.

Alwal0307