Jump to content
Ad: Genuine BMW parts & accessories from the BMW official store on eBay ×

Knocking From Nearside Front

G4VHD

By G4VHD,
in BMW 3 Series Forum

 Share

Recommended Posts

G4VHD Grand Master

G4VHD

Posted
Posted

I think I may have covered all bases just want any other opinions before i start taking things apart.

When turning, stationary or moving, I'm getting a loud knocking noise from the nearside front.

Now I'm thinking i have another bush gone or a steering rack problem.

It not affecting handling nor does it knock when braking.

Both drop links and and front, rear control arm bushes have been replaced recently.

Also it doesn't knock when jacked up, with is making me think its more likely bushes?

Guest Mister Dabsy

Guest Mister Dabsy

Posted
Posted

Good suggestion Sam, worth a look...

Gav - (Assuming it could be the strutt) - Jack that side up and unlock the FAT nut at the strutt-top (you might need an Allen key too), rotate the Allen key 90 degs and tighten the fatty then test ! If worse the repeat in oppo direction x2... No joy? Drop the strutt and check for wear/play at the top of the strut (internally)... Examine the previous ideas first eh?

  • 4 months later...
M1 KES Enthusiast

M1 KES

Posted
Posted

I had a similar knocking... Turned out to be a worn ball joint on the lower front control arm.

Was so worn that when i jacked it up the ball joint popped right out. Considering id just come back from Manchester to Surrey my heart almost stopped! Lol

Does the steering wheel judder on long bends or exiting large roundabouts?

G4VHD Grand Master

G4VHD

Posted
  • Author
Posted

I had a similar knocking... Turned out to be a worn ball joint on the lower front control arm.

Was so worn that when i jacked it up the ball joint popped right out. Considering id just come back from Manchester to Surrey my heart almost stopped! Lol

Does the steering wheel judder on long bends or exiting large roundabouts?

All sorted now mate, was as you described.

G4VHD Grand Master

G4VHD

Posted
  • Author
Posted

Woops should check the dates these were posted in future =p

Lol, this was a while back.

All new bushes, control arms, drop links, mounts, shocks and springs then coil overs been fitted since.

Thanks for the help anyway dude.

M1 KES Enthusiast

M1 KES

Posted
Posted

Hope u did it yourself like me lol garage quoted me £900 for the same work.

All the best =)

Latest Deals

BMW Official Store for genuine BMW parts & accessories

Disclaimer: As the club is an eBay Partner, The club may be compensated if you make a purchase via eBay links

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing




  • Latest Topics

    1. 6

      X3 2.0 automatic

      Many thanks for the help I've hot the car booked in for a full health check but it seem that the transfer box oil as not been changed for nearly 3 years so I'm hoing to do that first to see if it helps
      Davesally in BMW X3 Series Forum
    2. 6

      X3 2.0 automatic

      hi , I had very similar problem a while back, and after a lot of testing with vista, it turned out to be a front R/H wheel , speed/wheel sensor. when it all was happing lots of codes were coming up gearbox, diff front and back, transever box,plus many more, didn't look good, but there was one code that repeatedly came up at the top of the list, at this point it was becoming undriveable ,it just didn't seem that a wheel sensor could cause all these codes. So I went got two wheel speed sensor, replaced driver side front, the problem never came back, the sensor controls so many systems ,cleared all codes, happy days, I could have pulled the car apart for nothing, and got nowhere, except an empty wallet. hope this helps you or someone.
      ANDYORAC in BMW X3 Series Forum
    3. 0

      Water leak at sharkfin aerial

      Has anybody experienced water leakage passed the sharkfin aerial to roof joint face.
      VFullard in BMW 4 Series Forum
    4. 7

      105C thermostat replacement

      As I understand the wiring diagrams and operation Item 9 on the thermostat housing is the sensor which sends its signal to the ECU for interpretation with information from the map sensor. Information from item 12 (1st drawing ) is also used to provide average temp across the cooling system. As far as I am aware the Thermostst is independent of the sensors and operated by expanding wax material internally
      Greydog in BMW 7 Series Forum
    5. 13

      BMW 318i boot locked can’t get into

      Errr not clear here Donald Plastic "L's" with short rubber hoses ??? Distilled water/Ionised water should only be used in an old style lead acid battery. The Rad and engine coolining system should be filled with the correct coolant mix to prevent cavitation and the danger of freezing in low temps. Coolant should be part of the cars regular maintenance and changed every 3 years or so. At that time all hoses and connectors should be inspected and changed where necessary to keep everything in tip top condition. Changing parts can cause as many problems as you may think your solving
      Greydog in BMW 3 Series Forum

  • Recent Achievements

    • Week One Done
      Davesally
      Davesally earned a badge
      Week One Done
    • One Year In
      Backmarker
      Backmarker earned a badge
      One Year In
    • Week One Done
      Karlos70
      Karlos70 earned a badge
      Week One Done
    • Week One Done
      DDONNY
      DDONNY earned a badge
      Week One Done
    • Collaborator
      Dimitris
      Dimitris earned a badge
      Collaborator

×
×
  • Create New...

Forums

News

Membership