Jump to content
Ad: Genuine BMW parts & accessories from the BMW official store on eBay ×

Z3 With Lpg

algrodzinsky

By algrodzinsky,
in New Members Welcome

 Share

Recommended Posts

algrodzinsky Newbie

algrodzinsky

Posted
Posted

hi guys

this is my first post,i am on my 3rd bmw,and am considering a z3 for a weekend fun car,i am considering a 1997 z3 1.9 with a lpg conversion,would people comment on the 1.9 and a 1.9 on gas.

kee1173 Experienced

kee1173

Posted
Posted

welcome mate...personally not a fan of LPG as a mate of mine in the motor trade says it knackeers the valves over time plus all the ones i look at in car ads always seem not to be working, also they need extra servicing each year....I had V8 Discovery once and was gonna put lpg on that but the cost £1500 and just to get the money back i would need to drive the car for 2 years then i would see the cost chamge ...personally not a bad idea on big engined cars like 4/5 litres but small engines i think it might be a long time before you see a return on what you paid for it.

G4VHD Grand Master

G4VHD

Posted
Posted

Welcome mate.

As said, there is not point that I can think of of having an LPG small engined car.

IanIOM Experienced

IanIOM

Posted
Posted

Agreed you have to do 15k a year to see any benifits,for a weekend toy,it would spoil it.1.9 is a cracking engine

Latest Deals

BMW Official Store for genuine BMW parts & accessories

Disclaimer: As the club is an eBay Partner, The club may be compensated if you make a purchase via eBay links

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing




  • Latest Topics

    1. 3

      Rough idle problem

      Hello Dave, Just an update and I think you may be right. Went out and gave it a few revs when cold, nothing. Let it warm up and there was a loud “shoooo”. I’ve attached a photo of where the sound was coming from. Going to get it looked into but do you have any idea of what it could be? First BMW, always had vag cars so engine are a little different to what I’m used to
      BLM06 in BMW 1 Series Forum
    2. 3

      Rough idle problem

      Hello Dave thanks for your reply, thanks for the reply and it does sound like that could be the problem. I was thinking injector but never pops an engine light up so wasn’t certain. Was serviced 6500 miles ago but was just oil and filters. Going to check later and see if I can see any visible cracks or splits. Got a friend who has a garage and will obd and smoke test it for me. Billy
      BLM06 in BMW 1 Series Forum
    3. 1

      E53 petrol fail safe again.

      Morning Stu Long time since I played with a straight six so the old memory might be wonky here so check realoem From memory it is linked to the Air Pump and Vacuum control system. Find the Airpump and follow the Vac lines to the rear of the engine you should find a valve with a plug on top (or end) first make sure all lines are good no splits or cracks check the valve is operating, dont forget there is a non return vale in the system close to the inlet manifold. Hope this helps Dave
      Greydog in BMW X5 Series Forum
    4. 1

      Water leak at sharkfin aerial

      Morning Vic New one to me but I guess anywhere there is a joint is suspect. Like the seals around the rear lights that suddenly start to leak, removing them a good clean and renewing the seals seems to work. Check www.realoem.com to see what is fitted and how Dave
      Greydog in BMW 4 Series Forum
    5. 3

      Rough idle problem

      Morning Billy When was the car last serviced ? The symptoms you describe could be due to an air or vacuum leak, old hoses seals and vacuum lines can start to crack when cold they are stiff and don't leak (as much) when hot and flexible you see the issue developing. Your OBD Scanner needs to be BMW capable a standard scanner will only see critical functions. Dave
      Greydog in BMW 1 Series Forum

  • Recent Achievements

    • First Post
      BLM06
      BLM06 earned a badge
      First Post
    • One Year In
      Driverbus70
      Driverbus70 earned a badge
      One Year In
    • Conversation Starter
      BLM06
      BLM06 earned a badge
      Conversation Starter
    • Conversation Starter
      Marvin chui
      Marvin chui earned a badge
      Conversation Starter
    • Week One Done
      Davesally
      Davesally earned a badge
      Week One Done

×
×
  • Create New...

Forums

News

Membership