Jump to content
Ad: Genuine BMW parts & accessories from the BMW official store on eBay ×

Help ... Bmw E46 Taken 16:9 Screen Out And Want To Fit Oem Radio

partstech
 Share

Recommended Posts

partstech Rookie

partstech

Posted
Posted

Hi all At bmw owners club im in need of some help please

if this topic has been covered then i apologise now but i dont think it has........

I have a 2002 bmw e46 318 saloon that originally had the 16:9 monitor and nav fitted from the factory.

i have now removed the 16:9 monitor, the bn54, the tv tuner, the gps antenna, the 6 disk mulitchanger, the heater relocation panel and the bracketry for the boot that holds most of the above...

i have left the oem nav loom in the car intact and now wish to fit a factory fit radio/cd player. obviously the standard cd/radio has one type of connector that fits the radio and the navi system has the two plugs that normally fit into the monitor. i want to leave the oem navi loom in the car as the loom goes in every direction under the passenger footwell carpet and i just cant be dealing with the headache of removing it and hoping all over systems are not effected ....

i have a bmw e46 318 saloon im breaking here that has the cd/radio plug and loom but want to know if there is an easy method of installing the radio using the donated connector for the stereo if i was to cut it from the donor car???

so basically i want to do the opposite of most bmw owners and remove nav and fit oem radio instead. please can anyone help me

Latest Deals

BMW Official Store for genuine BMW parts & accessories

Disclaimer: As the club is an eBay Partner, The club may be compensated if you make a purchase via eBay links

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing




  • Latest Topics

    1. 0

      Bmw x1 2012 won't start

      I recently had a problem with my bmw x1 2012, failed to start,fault code came up , got the foot control module and battery replacement, not even two days of driving the car won't start again and the engine light is on .mechanic is now saying it's the starter
      Marvin chui in BMW X1 Series Forum
    2. 6

      X3 2.0 automatic

      Many thanks for the help I've hot the car booked in for a full health check but it seem that the transfer box oil as not been changed for nearly 3 years so I'm hoing to do that first to see if it helps
      Davesally in BMW X3 Series Forum
    3. 6

      X3 2.0 automatic

      hi , I had very similar problem a while back, and after a lot of testing with vista, it turned out to be a front R/H wheel , speed/wheel sensor. when it all was happing lots of codes were coming up gearbox, diff front and back, transever box,plus many more, didn't look good, but there was one code that repeatedly came up at the top of the list, at this point it was becoming undriveable ,it just didn't seem that a wheel sensor could cause all these codes. So I went got two wheel speed sensor, replaced driver side front, the problem never came back, the sensor controls so many systems ,cleared all codes, happy days, I could have pulled the car apart for nothing, and got nowhere, except an empty wallet. hope this helps you or someone.
      ANDYORAC in BMW X3 Series Forum
    4. 0

      Water leak at sharkfin aerial

      Has anybody experienced water leakage passed the sharkfin aerial to roof joint face.
      VFullard in BMW 4 Series Forum
    5. 7

      105C thermostat replacement

      As I understand the wiring diagrams and operation Item 9 on the thermostat housing is the sensor which sends its signal to the ECU for interpretation with information from the map sensor. Information from item 12 (1st drawing ) is also used to provide average temp across the cooling system. As far as I am aware the Thermostst is independent of the sensors and operated by expanding wax material internally
      Greydog in BMW 7 Series Forum

  • Recent Achievements

    • Conversation Starter
      Marvin chui
      Marvin chui earned a badge
      Conversation Starter
    • Week One Done
      Davesally
      Davesally earned a badge
      Week One Done
    • One Year In
      Backmarker
      Backmarker earned a badge
      One Year In
    • Week One Done
      Karlos70
      Karlos70 earned a badge
      Week One Done
    • Week One Done
      DDONNY
      DDONNY earned a badge
      Week One Done

×
×
  • Create New...

Forums

News

Membership