Jump to content
Ad: Genuine BMW parts & accessories from the BMW official store on eBay ×

330D Parking Sensors,and Turbo Noise

paul o

By paul o,
in BMW 3 Series Forum

 Share

Recommended Posts

paul o Newbie

paul o

Posted
Posted

Hi this is my first time so i am hoping that being new to it that someone can help,my 330d auto e46 2002 has problems with the parking sensors,i have done the clicking test and found one that was not working,replaced it but still have same long beeeeeep then nothing else.taken them out cleaned them checked wires all ok,can anyone give me some advice before i prang my car.also i get a loud screeching noise from what seems to be the turbo,but only when its put under hard acceleration it sounds much like a belt when slipping but all these have been checked and are fine.any help would be great thanks paul o. :wacko:

  • 2 weeks later...

Latest Deals

BMW Official Store for genuine BMW parts & accessories

Disclaimer: As the club is an eBay Partner, The club may be compensated if you make a purchase via eBay links

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing




  • Latest Topics

    1. 0

      Z3 airbag wiring,

      I'm am sorry if I am doing this incorrectly but I have searched and not found anything related to this but I am still learning all of this. Does anyone know about the yellow airbag/ seat belt connector under the driver’s seat? I am sure the previous owner has changed this but I am wondering if anyone has seen this before? If so, should I remove the butt connectors and solder the wires? Should the wires be twisted all the way to the yellow connector? Any help is greatly appreciated. Thanks, JayMe
      JayMe in BMW Z3 & Z4 Series Forum
    2. 0

      Connectors in the boot next to the battery

      Hi - I have a 2007 1.6L Petrol 1 series and it has wire connectors in the boot near the battery but I don't know what they are meant to connect to. Are they just spare or is there a part missing? The car currently not starting but we think it is a BCM fault but just wanted to know what the cables in the boot are meant for. Any help would be greatly appreciated be gratefully appreciated as we can't read the fault codes as we think the BCM is faulty and the car won't idle properly but there might be some other issue. Regards Andrew
      Andrewkuk in BMW 1 Series Forum
    3. 2

      Access to Battery terminals on BMW 1 Series 2020

      Hi Dave, Great, very helpful. Many thanks.
      Max123 in BMW 1 Series Forum
    4. 1

      Bmw x1 2012 won't start

      Morning Marvin You need a Diagnostic Scan with a BMW capable system , I assume that when the Footwell control module and and Battery were replaced they were correctly registered to your chassis ? Has your Mechanic checked the starter solenoid ? much cheaper than a starter Hope this helps Dave
      Greydog in BMW X1 Series Forum
    5. 26

      A paddling pool in the rear of my 08 reg 635d Convertible !!

      Morning John Did Bert refill the paddling pool ? Dave
      Greydog in BMW 6 Series Forum

  • Recent Achievements

    • Conversation Starter
      JayMe
      JayMe earned a badge
      Conversation Starter
    • Conversation Starter
      Andrewkuk
      Andrewkuk earned a badge
      Conversation Starter
    • One Month Later
      DAW90
      DAW90 earned a badge
      One Month Later
    • First Post
      Max123
      Max123 earned a badge
      First Post
    • Conversation Starter
      Max123
      Max123 earned a badge
      Conversation Starter

×
×
  • Create New...

Forums

News

Membership