G4VHD

Try this http://cgi.ebay.co.uk/CRC-AIR-SENSOR-CLEAN-MASS-AIR-FLOW-CLEANER-MAF-UK-STOCK-/270695674441?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item3f06b83249

Firstly is your car doing this? If so this is what you need...."Front wishbone, Rear Bushes" Secondly, I cant be arsed to do a wite up so Ive nicked various peoples hard work ;) Jack car up and put on axle stands, then remove poo plate from under the engine bay (photo below) Remove these 2 bolts (16mm socket) Then watch this video to give you an idea of what im on about..If your bushes are totaled you wont need a tool to pull them off, just a rubber mallet and some muscle :lol: Tap your new ones on with your mallet but they must be 291 +/-1mm from the centre of the balljoint to the metal side of the bush housing,dont push it too far as it wont be easy to get back. Use some washing up liquid if they are difficult. 59nm for the rear mount Bolts. Then put everything back together basicaly..EASY Please ask if you get confused, Ive rushed this im a little busy sorry.

Deffo bushes or steering racket. Ill sort it out when I get to my computer

Fair play to you mate. .. A long time dead

I know I know. ....work gets in the way lol

And I'm here ;-) I just changed front wishbone, rear bushes. Not sure if there the prob with your car but ill put a "how to" up when I get to my computer tonight. Welcome along too.

Top man.. Thanks Was there much handling difference?

ummm, Ill ask the lads at work tomorrow for you.

yeah, under the cover on the hand brake, 2 10mm bolts. Walsall, West mids, by Birmingham 125 miles from Wiltshire!!!!!!!!!!

When was your last full service

None of them hold mate, so I've heard. And I bet they just adjusted them from the cab. If you want to travel here Ill do them lol

Yeah, you can do it without taking the discs off, but i found this impossible. No drama taking the discs off though. I'd do it for you, but your so far away :mellow: If adjusting them dont work let me know and Ill tell you how to change them But changed mine and my P brake still dont hold on my drive!!!

Half towards your new shoes???

Get with it Andy

Mate do them yourself, there easy. Honestly, an hours work. But I bet you £20 they ony need adjusting...not in the cab at the wheel.. I got a how too up here somewhere hold on Ill post it up here

Cheers for the advice Andy, not heard about the 100k thing, I'll look into it.

40 notes top, did mine last week. Try adjusting them first, if you want a walk through I can do one for adjusting and changing. They shouldnt need replacing though as they should last the lifetime of the car.

Right decided to do it (sorry Andy) Im going to to a little more research to make sure I buy everthing I need and that I can deffo fit them my self. Anyone got any advise

See my new post

Welcome along, im sure someone here will be along to help you soon.

Ive looked into re-mapping my 320d, Can go from 150bhp to around 180bhp and get more mpg so I think it worth it, and maybe in the future may (will ;)) go for it.

will that cost much?

Something not right there I dont care what anyone says Welcome along