Jump to content

kirky

Regular Member
 View Profile  See their activity

  • Posts

    13

  • Joined

  • Last visited

  • Days Won

    1

 Content Type 

Everything posted by kirky

  1. kirky
    Hi all. Technician from Scotland here. If anyone needs any help or advice feel free to get in touch with me. Thanks
  2. kirky
    Various n47 Diesel engine parts. Feel free to get in touch with anything you require. Thanks
  3. kirky

    Swirl Flaps

    kirky replied to Dod's topic in BMW 3 Series Forum

    Can't confirm if that model has them. What engine is in it? Not a major job, inlet manifold off, fit the blanking kit and then back on. Obviously with the manifold off cover the inlet ports up to stop any foreign objects getting down there.
  4. kirky
    Just the battery going flat with the inactivity. If the car isn't used regularly then it's worth getting a small battery charger to keep it topped up when not being used.
  5. kirky
    If the car has stop start function from the factory then the only way to deactivate it is through re programming. Any dme faults stored will disable the function. Even if say a glow plug fault is stored then the stop start won't work.
  6. kirky
    It's programmed into the ecu. Then when all the required conditions are met the stop start function will work. Any dme related fault codes stored will stop the function working. Other things that affect it are things like temperature, battery charge, etc
  7. kirky
    You might be able to find a cheap one on places like eBay. You need a obd2 code reader to read your car
  8. kirky
    Charge the battery fully then leave the car to sit and go to sleep. The sleep cycle is 6 hours long. Then retest the fault. The stop start function won't operate if any dme fault codes are stored so maybe worth a diagnostic check. Where are you based mate?
  9. kirky
    Yes sounds like a timing chain fault. Any lack of performance or lights on dash? Where you based about mate?
  10. kirky
    Check for diagnostic codes stored. Possible air flow fault. If the code is a air flow code possible that the engine is " coked " up.
  11. kirky
    Run the car up to operating temp and then take the level plug out ( Allan key screw but can't remember the size ). No oil should come out but use a piece of paper and check where the oil level is at. If it not near the level plug hole then top up. Then clean the suspected leak area and drive then recheck the leak
  12. kirky
    Not got a BMW yet.... Looking to buy one I the near future. Probably a slightly older 1 series. Thanks for the welcome and I'm here to offer help and advice anytime use need it
  13. kirky
    Hi guys and girls, my name is kirk and I'm a BMW tech in Scotland. Hopefully at some point I can help you guys out with info when requested. Cheers
×
×
  • Create New...

Forums

News

Membership