Jump to content

Holtenwil

Regular Member
  • Posts

    3
  • Joined

  • Last visited

Profile Information

  • First Name
    Holten
  • BMW Model
    330
  • BMW Year
    2002

Holtenwil's Achievements

Rookie

Rookie (2/14)

  • First Post
  • Conversation Starter

Recent Badges

0

Reputation

  1. "My car driving total deviation to the right, made a few orientation or deviation, how to solve?" Experts, the cars with the deviation is relatively common problem. 1. The four misregistration. In most cases, by doing wheel alignment can be solved, but if you do wheel alignment can not be resolved, it must be other causes. 2. The sides of the tread pattern is not the same or a deep one shallow not as high. The whole car is best used the same type of tire, front axle and rear axle at least two tires must be the same, and tread depth must be the same, more than the wear limit must be replaced. 3. sides of the tire pressure range. Tire pressure tire will become unequal sample sizes, scroll up and bound deviation. The deformation of the spring on both sides of the front adjustable coilover cushion inconsistent. Comparable to judge the quality of the shock absorber spring by pressing or after removal. 5. Front shock absorber failure. After the failure of the front shock absorbers in the vehicle in two hanging one high and one low, discontinuity, leading to deviation. Special damping tester can detect the degree of absorption dampers, shock absorbers or bad judgment; as unconditional removable, with stretch the way to judge. 6. vehicle chassis components is not normal wear and tear is too large a gap exists. Steering Con rod ball, the support arm pouches, pouches and other stabilizer bar is a common part of the gap is too large and easy, trucks should be carefully examined. 7. The brake of a wheel return poor separation incomplete. This is equivalent to one side of the wheel is always part http://www.maxspeedingrods.co.uk/high-performance-mitsubishi-eclipse-evo-4g63-4g64-100mm-stroke-7-bolt-4340-en24-chrome-moly-billet-crankshaft.html of the brake is applied, the vehicle is bound up with deviation. Inspection, can feel the wheels of temperature, such as a wheel than a lot of other wheels, indicating a return to the bad brake wheel. 8. Frame overall deformation. Both sides of the wheelbase difference is too large, exceeding the maximum allowable range, can be measured by a tape measure; as beyond the scope must be corrected by the correction units. Recommend blog http://jolin.mixform.com/
  2. For cars equipped with turbochargers, after climbing at high speeds or do not immediately turn off the engine idle for 10 minutes before the flame, the car is equipped with a turbocharger speed the formation of coke than the naturally aspirated type of car to be several times faster. Recommended that car owners in the routine maintenance of the conditions are met to do something every 20,000 to 40,000 km during the intake system to avoid demolition clean, that is the premise of the disintegration of the engine without using special methods and special equipment of the vehicle with BMW Conrod inlet , parts of the valve is easy to form coke, oil, etc. clean coke operations.
  3. There are many car owners know very little about car maintenance knowledge, for example, some car owners often short-range low-speed driving, leading to engine deposits, car alarms occur, and thus considered to be automotive quality problems. Recommend this Zhongjing Li is given regularly drove Lara-speed, high temperature and high speed when the engine is running, can automatically eliminate carbon deposits. Of course, if possible, or try to drive less. Otherwise, the same problem can not be avoided any vehicle. Coke problem is relatively typical "misunderstanding", in addition to carbon, burning oil is also true. Many owners have complained their car burning oil phenomenon, in fact, this phenomenon is perfectly normal. The difference is that each vehicle will have oil loss, but not every car will alarm. As previously mentioned article, the BMW has a CBS system, when oil consumption to a certain amount, it will be lit yellow alarm. Note here that the yellow light, red light instead of the normal models. What is the difference between what? Amber light when the vehicle can continue driving, but less than normal because of the amount of oil, so the owners of BMW recommends to the nearest service station for proper oil added. But if the red light, the vehicle is necessary for on-street parking, phone calls rescue. It is for this consideration, the BMW is very intelligent design in advance oil warning (yellow), and many brand cars such as Hayabusa with Hayabusa conrods do not like CBS maintenance system, only oil lamps will really exhausted when the alarm (red light), You can say that it is too "late." But the situation is rare but exhausted oil, which leads to a lot of people think that BMW is often due to lack of oil and alarm, engine burning oil will spread. It seems precautions are not necessarily "good". I think BMW is not going to cancel this self-test system, so if I can maintain mileage dropped to 5000 km again? Both to increase the store's maintenance revenue, but also to conceal the normal consumption of oil.
×
×
  • Create New...

Forums


News


Membership